| Customization: | Available |
|---|---|
| After-sales Service: | Supported |
| Warranty: | Supported |
|
Still deciding? Get samples of US$ 1000/Roll
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
For galvanized coils, the sheet steel is immersed in a molten zinc bath to make a sheet of zinc coated on its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously immersed in a plating tank with zinc melted to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also manufactured by hot dip method, but immediately after being out of the tank, it is heated to about 500 ºC to form an alloy coating of zinc and iron. This galvanized coil has good paint adhesion and weldability.
Product use: The coated steel plate has light weight, beautiful appearance and good corrosion resistance, and can be directly processed. It provides a new type of raw material for the construction industry, shipbuilding industry, vehicle manufacturing industry, furniture industry, electrical industry, etc. Substituting steel for wood, efficient construction, energy saving, pollution prevention and other good effects. The color-coated steel plate using galvanized steel plate as the substrate, in addition to zinc protection, the organic coating on the zinc layer plays a role of covering and isolation, which can prevent the steel plate from rusting, and its service life is longer than that of the galvanized steel plate.
According to reports, the coating The service life of steel plate is 50% longer than that of galvanized steel plate. However, in different regions and different parts of use, the service life of color-coated sheets with the same amount of galvanizing, the same coating, and the same coating thickness will be very different. For example, in industrial areas or coastal areas, due to the effect of sulfur dioxide gas or salt in the air, the corrosion rate is accelerated and the service life is affected. In the rainy season, if the coating is soaked by rainwater for a long time, or the parts where the temperature difference between day and night is too large and easy to condense, will be corroded quickly, and the service life will be reduced. Buildings or workshops made of color-coated steel plates have a long service life when they are often washed by rainwater, otherwise, they will be affected by the action of sulfur dioxide gas, salt and dust. Therefore, when designing, if the inclination of the roof is larger, it is less likely to accumulate dust and other dirt, and the service life will be longer; for those areas or parts that are not frequently washed by rainwater, they should be washed with water regularly.
Applications of color-coated steel sheets: Construction (outdoor) workshops, agricultural warehouses, residential prefabricated elements, corrugated roofs, walls, rainwater pipes, balcony railings, newsstands, cold storages, kiosks, rolling shutters Construction (indoor) doors, Door frames, house light steel structures, screens, ceilings, elevators, stairs, ventilation ducts, electrical appliances, refrigerators, washing machines, switch cabinets, instrument cabinets, air conditioners, microwave ovens, bread machine furniture radiators, lampshades, wardrobes, tables, beds, dressing boxes, Bookshelf transportation industry, interior decoration of automobiles and trains, partitions, containers, partitions, ship partitions, other whiteboards for writing, garbage cans, billboards, clocks, typewriters, dashboards, weights, photographic equipment
|
Name |
galvanized steel coil |
|
Standard |
AISI,ASTM,GB,JIS |
|
Material |
SGCC,SGCH,G550,DX51D,DX52D,DX53D |
|
Brand |
Sino Steel |
|
Thickness |
0.12-6.0mm |
|
Width |
600-1250mm |
|
Tolerance |
"+/-0.02mm |
|
2016 Prime Quality Coils Or Sheet PPGIinc coating |
40-275g/m2 |
|
Surface treatment: |
unoil,dry,chromate passivated, non-chromate passivated |
|
Spangle |
regular spangle ,minimal spangle, zero spangle,big spangle |
|
Coil ID |
508-610MM |
|
Coil Weight |
3-5 tons |
|
Technique |
Hot rolled, cold rolled |
|
Package |
Standard seaworthy export packing: 3 layers of packing, inside is kraft paper, water plastic film is in the middle and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve. |
|
Certification |
ISO 9001-2008,SGS,CE,BV |
|
MOQ |
5 TONS (in one 20ft FCL) |
|
Delivery |
15-20 days |
|
Monthly Output |
10000 tons |
|
Description |
Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. Galvanized steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion. |
|
Payment |
T/T, LC, Western Union, |
|
Remarks |
Insurance is all risks and accept the third party test |
Strip steel is a kind of narrow and long steel plate produced by various steel rolling enterprises in order to meet the needs of industrialized production of various metal or mechanical products in different industrial sectors. Strip steel, also known as steel strip, is within 1300mm in width and slightly different in length according to the size of each roll.
Steel plates with thin thickness, narrow width and long length. Its width is generally 20mm-200mm. It is supplied in rolls, and its specifications are expressed as thickness × width. According to the quality of the steel, it is divided into high-quality and ordinary strip; according to the rolling method, it is divided into hot-rolled and cold-rolled, which are called hot-rolled strip and cold-rolled strip respectively. The thickness of hot-rolled ordinary strip is 2 mm-6 mm, and the thickness of cold-rolled strip is generally 0.05 mm-3.60 mm. Strip steel can be made of ordinary carbon steel, carbon structure steel, spring steel, tool steel, stainless steel and other steel grades. Widely used in the manufacture of welded pipes, clamps, gaskets, spring blades, saw blades, blades, etc.
Strip steel is generally supplied in coils, which have the advantages of high dimensional accuracy, good surface quality, easy processing, and material saving.
The production process of cold-rolled strip steel is generally: pickling → rolling → process lubrication → annealing → leveling → shearing → packaging.
Cold-rolled strip steel process: pickling - rolling - annealing - rolling size synchronization lubrication - anti-rust oil - leveling and sizing - polishing - packaging
Hot-rolled strip process: heating furnace - dephosphorization machine - rough rolling mill - dephosphorization machine - finishing mill - surface quality tester - layer cooling - coiling machine - baler - spray number Machine - roll warehouse slab
Hot-rolled strip production process: first, the temperature is raised to the required rolling temperature in the heating furnace, and then enters the rough rolling dephosphorization machine through the roller table to process the iron oxide scale produced by the slab, and then enters the rough rolling mill. Roll the width and thickness of the strip, and then transport it from the roller table to the finishing rolling dephosphorization machine to process the iron oxide scale produced on the surface of the strip, and then enter the finishing rolling mill to change the thickness and width of the strip. For precise rolling, the strip steel is strictly controlled by the roller table to control the surface temperature before coiling, and then enters the coiler to become the steel coil.
|
Galvanized Steel Coils |
|||||
|
No. |
Item |
Unit |
Values |
||
|
1 |
appearance |
-- |
Straight, smooth, plain |
||
|
2 |
size |
length |
m |
1000~5000 or requested |
|
|
width |
mm |
12~1100 or requested |
|||
|
3 |
thickness |
steel base |
mm |
0.200±0.015 or requested |
|
|
0.155±0.010 or requested |
|||||
|
0.120±0.010 or requested |
|||||
|
film |
side A |
mm |
0.058±0.013 or requested |
||
|
side B |
|||||
|
tape |
mm |
0.310±0.015 or requested |
|||
|
0.260±0.015 or requested |
|||||
|
0.22±0.015 or requested |
|||||
|
4 |
Standard |
AISI,ASTM,GB,JIS |
|||
|
5 |
Technique |
Hot Rolled |
|||
|
6 |
Surface Treatment |
Chroming |
|||
|
7 |
tensile strength of tape |
mpa |
310~390 |
||
|
8 |
elongation at break |
% |
20~35 |
||
|
9 |
bond strength between steel tape and coating |
side A |
N/cm |
≥6.13 |
|
|
side B |
|||||
|
10 |
bond strength of heat seal of tape |
N/cm |
≥17.5 |
||
|
11 |
cutting strength of heat seal of tape |
-- |
before breakdown happens to coated steel tape or damage happens between film and steel, damage never happen to the heat seal area. |
||
|
12 |
bond strength of tape after putting into water, 68±1 centigrade,168h |
side A |
N/cm |
≥6.13 |
|
|
side B |
|||||
|
13 |
jelly resistance, 68±1 |
Umbrella brand |
-- |
no buld, no separation |
|
|
WT-103 |
|||||
|
14 |
dielectric strength, DC 2KV, 1 min |
-- |
without breakdown |
||
|
15 |
corrosion resistance, 0.1 mol/L, HCL, 480h |
grade |
8 or requested |
||
| Stainless steel sheet /plate |
| Stainless steel coil |
| Stainless steel pipe/tube |
| Stainless steel square/angle bar |
| Galvanized steel sheet/plate |
| Galvanized steel coil |
| Galvanized steel pipe/tube |
We have multiple quality system certifications to ensure that high-quality products reach your hands.
Tianjin Kai shuo weiye Iron and Steel Group Co. Ltd, established in 2000.The company's main business: various types of angle steel, channel steel, I-beam, H-beam, steel plate, square tube and other profiles, which can meet the needs of customers in different industries for special specifications of various steels. We can provide products such as plates, pipes, profiles, building materials, special steel, stainless steel and non-ferrous metals.
With many years of experience in the steel industry, the company has a strong ability to control the market. According to the market demand, the company adjusts the inventory in a timely manner. The annual inventory is more than 10,000 tons, which can guarantee to meet the needs of market customers. The sales network has spread all over the world. We have exported more than 100countries like USA, Mexico, Canada, Spain, Russia, Singapore, Thailand, India etc
The factory area of Kai shuo weiye Iron and Steel Group covers an area of about 70,000 square meters, and has processing equipment such as large shearing machine, circular shearing machine, straightening machine, annealing furnace, punching and shearing production line.
The annual inventory is more than 10,000 tons, which can guarantee to meet the needs of market customers. The sales network has spread all over the world. We have exported more than 100countries like USA, Mexico, Canada, Spain, Russia, Singapore, Thailand, India etc
The quality of our products has been certified by ISO9001,SGS, JIS, BV, etc., and each product has a product inspection report to support customer inspection.
Sufficient inventory, now orders can be shipped directly, 7*24 hours online service, professional sales and after-sales service team, to solve various problems for you.
We have a strict quality control system, which can be customized according to your size. The price is low and the quality is high. Send us an inquiry now to get more discounts.
What we offer:
1) Good quality control
2) Highly competitive prices
3) state-of-art technology products
4) Smooth communication
5) Effective OEM&ODM service
1. What is your payment terms?
Kai shuo weiye Steel prefers 30%TT before inspection and the rest 70% against BL. However, our price term is negotiable. Multiple payment terms are available from us.
2. Which payment method can I choose?
Kai shuo weiye Steel accepts all types of secured payment methods. Bank transaction, Trading Assurance, Paypal and etc are all available from us. Please feel free to contact us about your preferred payment method.
3. Is sample providing service available?
Kai shuo weiye Steel provides free samples to our clients. We usually also cover the sample shipping cost. Please feel free to order a sample from us.
4. Is customization available?
Kai shuo weiye Steel's expert equipment and highly-trained workers are capable of manufacturing highly customized products. Please feel free to discuss with us about your customized requirements, we can surely meet your needs.
5. What products and materials do you supply?
Kai shuo weiye Steel mainly supplies all catalogs and all grades of steel and stainless steel products. Coils, strips, sheet, pipes, bars, beams, flanges and other customized products. Tin coating, Ti coating, galvanization and other surface treatments are also available.
Other than steel products,Kai shuo weiye Steel also has high production capacity and holds large ready stock of all kinds of copper and aluminum products.
Please feel free to consult us about any related products above, we can surely meet your requirements.
6. Why should I choose you?
Kai shuo weiye Steel Industry company has deeply engaged in metal material market for over 15 years. We established perfect reputation world-widely. Craftsmanship spirit is the fundamental of Kai shuo weiye Steel since we are established. Kai shuo weiye Steel keeps our products as highest quality and lowest price to maintain our self competitive. Proving our clients with best trading experience is the goal we always insist of.
7. How can I make sure you are a reliable supplier?
Kai shuo weiye Steel is willing to provide our copies of company registration certificate, registration and Chinese exporting registration for you to view. These certificates are under Chinese Trading Law effect. They can help you officially check our company's capability and status.
On the products' side, certificates as Mill Test Certificate(MTC), Third Party Material Quality Conformity Certificate and other required certificates are available before the order. Samples are also available from us for you to test in your own testing facility. Kai shuo weiye Steel also supports third-party inspection before shipping. Kai shuo weiye Steel also welcomes a company tour for you to check our factory status.
){kind=link}